Steel Angles are the most basic type of roll-formed steel. They are formed by bending a single angle in a piece of steel. Angle Steel is ‘L’ shaped; the most common type of Steel Angles are at a 90 degree angle. The legs of the “L” can be equal or unequal in length.

 

Steel angles are used for various purposes in a number of industries. Framing is one of the most common uses for steel angles, but steel angles are also used for brackets, trim, reinforcements, and many other uses. Anywhere a 90 degree angle needs to be maintained.

 

Millform steel angles are a great choice for preserving the edges of tiles against wearing and chipping. The larger the steel angle, the more weight and stress it can bear. The use of stainless steel angles in tiled areas is also advisable due to stainless steel's extreme corrosion resistance, meaning it will withstand being in a wet area.

 

 Get Quote

 

STANDARD STEEL FACADE SYSTEMS PRICES, DIMENSIONS AND PROPERTIES

  • 120 x 35 Facade Top Hat

    • 120 x 35 x 1.10 Bmt Facade Top Hat = 2.00 kg’s/metre
    • Standard Pack: 50 Lengths x 6.000M, 7.200M
    120 x 35 Facade Top Hat
  • 50 x 35 Intermediate Top Hat

    • 50 x 35 x 1.10 Bmt Intermediate Top Hat = 1.35 kg’s/metre
    • Standard Pack: 50 Lengths x 6.000M, 7.200M
    50 x 35 Intermediate Top Hat
  • 8.0mm Back Flashing

    • 8.0mm x 0.48 Bmt Back Flashing = 0.28 kg’s/metre
    • Standard Pack: 500 Lengths x 3.000M
    8.0mm Back Flashing
  • 3.5mm Back Flashing

    • 3.5mm x 0.48 Bmt Back Flashing = 0.28 kg’s/metre
    • Standard Pack: 500 Lengths x 3.000M
    3.5mm Back Flashing
     
  • steel facade systems in Australia